Difference between revisions of "Template:S5Pxx18Android"

From FriendlyARM WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 1: Line 1:
 
==Work with Android==
 
==Work with Android==
===Work with 4G Module EC20 under Android===
+
===Work with 4G Module EC20 under Android5===
 
====Hardware Setup====
 
====Hardware Setup====
 
{{#switch: {{{1}}}
 
{{#switch: {{{1}}}
Line 20: Line 20:
 
}}
 
}}
 
Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.<br />
 
Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.<br />
 +
 +
{{#switch: {{{1}}}
 +
| Smart4418 =
 +
===Connect Smart4418 to 4G Module===
 +
* The Smart4418 can work with some 4G modules under Android 4.4. After you connect a 4G module (e.g. ME909u-521 which supports  FDD-LTE) to a Smart4418 power on the board the 4G module will be activated automatically
 +
[[File:4G Model-nanopc-t3.png|frameless|500px|4G Model]]
 +
| #default =
 +
}}
  
 
===Modify the Android boot Logo===
 
===Modify the Android boot Logo===

Revision as of 05:43, 25 December 2018

1 Work with Android

1.1 Work with 4G Module EC20 under Android5

1.1.1 Hardware Setup

Connect an EC20 module to a USB to miniPCIe board and connect the board to an ARM board's USB Host. Here is a hardware setup:
T2-4G-EC20.jpg
Power on the board and you will be able to surf the internet with the 4G module like using an Android phone.


Replace the logo.bmp:

/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi3/boot/logo.bmp
/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi2/boot/logo.bmp

Replace the bootanimation.zip:

/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi3/bootanimation.zip
/opt/FriendlyARM/smart4418/android/device/friendly-arm/nanopi2/bootanimation.zip

Re-compile android.