Difference between revisions of "Template:FriendlyWrt19"

From FriendlyARM WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 10: Line 10:
  
 
===Login FriendlyWrt===
 
===Login FriendlyWrt===
Type {{{1}}}'s IP address in a browser's address bar and enter to open FriendlyWrt's administration page or you can login into FriendlyWrt's administration page via SSH.
+
Type {{{1}}}'s IP address or http://friendlywrt/ in a browser's address bar and enter to open FriendlyWrt's administration page or you can login into FriendlyWrt's administration page via SSH. <br />
 +
By default, the IP address of the LAN port is 192.168.2.1, and the WAN will dynamically obtain the IP address from your main router.
  
 
===Install Software Packages===
 
===Install Software Packages===
Line 23: Line 24:
 
$ opkg list
 
$ opkg list
 
</syntaxhighlight>
 
</syntaxhighlight>
At the time of writing there are 3241 available packages.
 
  
 
====List Installed Packages====
 
====List Installed Packages====
Line 68: Line 68:
 
mount -t cifs //192.168.1.10/shared /movie -o username=xxx,password=yyy,file_mode=0644
 
mount -t cifs //192.168.1.10/shared /movie -o username=xxx,password=yyy,file_mode=0644
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
 +
  
 
===Compile FriendlyWrt===
 
===Compile FriendlyWrt===
 
Refer to: [[How to Build FriendlyWrt/zh]]
 
Refer to: [[How to Build FriendlyWrt/zh]]

Revision as of 02:22, 21 April 2020

1 Work with FriendlyWrt

1.1 Introduction to FriendlyWrt

FriendlyWrt is a customized system made by FriendlyElec based on an OpenWrt distribution. It is open source and well suitable for developing IoT applications, NAS applications, smart home gateways etc.

1.2 Account & Password

By default the password is NULL. You can set a password for root for web and SSH login.

1.3 Network Connection

Use a network cable to connect {{{1}}}'s WAN to a master router and the board will get an IP address via DHCP. Login into the router and check {{{1}}}'s IP address.

1.4 Login FriendlyWrt

Type {{{1}}}'s IP address or http://friendlywrt/ in a browser's address bar and enter to open FriendlyWrt's administration page or you can login into FriendlyWrt's administration page via SSH.
By default, the IP address of the LAN port is 192.168.2.1, and the WAN will dynamically obtain the IP address from your main router.

1.5 Install Software Packages

1.5.1 Update Package List

Before install software packages update the package list:

$ opkg update

1.5.2 List Available Packages

$ opkg list

1.5.3 List Installed Packages

$ opkg list-installed

1.5.4 Install Packages

$ opkg install <package names>

1.5.5 Remove Packages

$ opkg remove <package names>

1.6 Work with Docker Applications

1.6.1 Work with Docker: Install JellyBin

mkdir -p /jellyfin/config
mkdir -p /jellyfin/videos
docker run --restart=always -d -p 8096:8096 -v /jellyfin/config:/config -v /jellyfin/videos:/videos jellyfin/jellyfin:10.1.0-arm64 -name myjellyfin

After installation, visit port 8096 and here is what you would find:
FriendlyWrt+JerryFin

1.6.2 Work with Docker: Install Personal Nextcloud

mkdir /nextcloud -p
docker run -d -p 8888:80  --name nextcloud  -v /nextcloud/:/var/www/html/ --restart=always --privileged=true  arm64v8/nextcloud

After installtion, visit port 8888.

1.7 Enable Swap Partition

Run the following commands in a commandline utility and reboot:

/etc/enable-swap.sh
reboot

1.8 Mount smbfs

mount -t cifs //192.168.1.10/shared /movie -o username=xxx,password=yyy,file_mode=0644


1.9 Compile FriendlyWrt

Refer to: How to Build FriendlyWrt/zh