NanoPi NEO2 Black

From FriendlyARM WiKi
Jump to: navigation, search

查看中文

1 Introduction

Overview
Front
Back
  • The NanoPi NEO2 Black is another fun board developed by FriendlyELEC for makers, hobbyists and fans.

2 Hardware Spec

  • CPU: Allwinner H5, Quad-core 64-bit high-performance Cortex A53
  • DDR3 RAM: 512MB/1GB
  • Flash: no onboard Flash, but one eMMC flash module socket
  • Connectivity: 10/100/1000M Ethernet, RTL8211E-VB-CG chip
  • USB Host: USB Type A x 1 and USB pin header x 1
  • MicroSD Slot: MicroSD x 1 for system boot and storage
  • LED: Power LED x 1, System LED x 1
  • GPIO1: 2.54mm pitch 10 pin-header, includes UART, I2C, IO, 5VIN/(or OUT)etc
  • GPIO2: 2.54mm pitch 6 pin-header, includes USB, line out, IO etc
  • Serial Debug Port: 2.54mm pitch 2pin-pads, 115200bps
  • Audio: line out on GPIO2
  • MicroUSB: Power input(5V/2A) and OTG
  • PCB Dimension: 40 x 40mm
  • Working Temperature: -20℃ to 70℃
  • Weight: 16.37g
  • OS/Software: u-boot,Ubuntu Core

3 Software Features

4 Diagram, Layout and Dimension

4.1 Layout

NanoPi NEO2 Black Layout
  • GPIO1(I2C/UART/GPIO)
Pin# Name Linux gpio Pin# Name Linux gpio
1 GPIOA0 0 2 5V in or out -
3 I2C_SDA0 - 4 5V in or out -
5 I2C_SCL0 - 6 GND -
7 GPIOA2 2 8 UART1_TX -
9 GND - 10 UART1_RX -
  • GPIO2(USB/Audio OUT)
Pin# Name Linux gpio Pin# Name Linux gpio
1 Line out Right - 2 USB DM -
3 Line out Left - 4 USB DP -
5 GND - 6 GPIOA3 3
  • eMMC Module Socket Pinout
Pin# Name Pin# Name
1 EMMC_D0 2 EMMC_D1
3 EMMC_D2 4 EMMC_D3
5 EMMC_D4 6 EMMC_D5
7 EMMC_D6 8 EMMC_D7
9 N/C 10 GND
11 EMMC_CMD 12 EMMC_CLK
13 N/C 14 GND
15 N/C 16 3.3V OUT
17 eMMC_RST 18 3.3V OUT
19 GND 20 GND
Note:
  1. For more details refer to the document: NanoPi_NEO2_Black_1907_Schematic.pdf

4.2 Dimensional Diagram

For more details refer to the document: pcb file in dxf format

5 Get Started