Matrix - One Touch Sensor

From FriendlyARM WiKi
Jump to: navigation, search

查看中文

Introduction

Matrix-One Touch Sensor.png
  • The Matrix One_Touch_Sensor is a digital one capacitive touch key module. It uses the one key capacitive touch pad detector IC TTP223. It has a touch key with stable touching detection. It is designed for replacing traditional direct button key with diverse pad size.By default it outputs low. When a finger touches the touch key it outputs high.

Features

  • Standard 3Pin interface
  • PCB dimension(mm): 16 x 24

Matrix-One Touch Sensor PCB.png

  • Pin Description:
Pin Description
S GPIO
V Supply Voltage 5V
G Ground

Basic Device Operation

The TTP223 is a one key capacitive touch pad detector IC. It measures changes of electric charges stored in the touch pad electrode with parasitic capacitance. The touch pad is usually attached to an insulator:acrylic, glass, porcelain, wood and etc.

Applications

Connect to NanoPi M1

Refer to the following connection diagram to connect the module to the NanoPi M1:
Matrix-One_Touch_Sensor_nanopi_m1

Connection Details:

Matrix-One_Touch_Sensor NanoPi M1
S Pin7
V Pin4
G Pin6

Connect to NanoPi 2

Refer to the following connection diagram to connect the module to the NanoPi 2:
Matrix-One_Touch_Sensor_nanopi_2

Connection Details:

Matrix-One_Touch_Sensor NanoPi 2
S Pin7
V Pin4
G Pin6

Connect to NanoPi M2 / NanoPi 2 Fire

Refer to the following connection diagram to connect the module to the NanoPi M2/ NanoPi 2 Fire.
Matrix-One_Touch_Sensor_nanopi_m2

Connection Details:

Matrix-One_Touch_Sensor NanoPi M2
S Pin7
V Pin4
G Pin6

Connect to NanoPC-T2

Refer to the following connection diagram to connect the module to the NanoPC-T2:
Matrix-One_Touch_Sensor_NanoPC-T2

Connection Details:

Matrix-One_Touch_Sensor NanoPC-T2
S Pin15
V Pin29
G Pin30

Compile & Run Test Program

Boot your ARM board with Debian and copy the matrix code:

$ apt-get update && apt-get install git
$ git clone https://github.com/friendlyarm/matrix.git

If your cloning is done successfully a "matrix" directory will be generated.

Compile and install Matrix:

$ cd matrix
$ make && make install

Run test program:

$ matrix-gpio_int

Note: this module is not plug and play therefore before running the module please make sure it is connected to an ARM board.
Here is what you should observe:

Waiting event...
Device[0] value is 1

When you touch the module's active area an event will be triggered and detected.

Code Sample

This Matrix code sample can work with all the ARM boards mentioned in this module's wiki. The name of this code sample is "matrix-gpio_int". Here is its source code:

int main(int argc, char ** argv)
{
    int i, board;
    int retSize = -1;
    char value[ARRAY_SIZE(dev)];
 
    if ((board = boardInit()) < 0) {
        printf("Fail to init board\n");
        return -1;
    }
 
    if (argc == 2)
        dev[0].pin = atoi(argv[1]);
    system("modprobe "DRIVER_MODULE);
    signal(SIGINT, intHandler);
    if (board == BOARD_NANOPI_T2)
        dev[0].pin = GPIO_PIN(15);
    printf("Use GPIO_PIN(%d)\n", dev[0].pin);
    if ((devFD =sensorInit(dev, ARRAY_SIZE(dev))) == -1) {
        printf("Fail to init sensor\n");
        goto err;
    }
    printf("Waiting event...\n");
    if ((retSize = sensorRead(devFD, value, ARRAY_SIZE(dev))) == -1) {
        printf("Fail to read sensors\n");
    }
    if (retSize > 0) {
        i = 0;
        for (i=0; i<retSize; i++) {
            printf("Device[%d] value is %d\n", i, value[i]);
        }
    }
    sensorDeinit(devFD);
err:    
    system("rmmod "DRIVER_MODULE);
    return 0;
}

For more details about this APIs called in this code sample refer to Matrix API reference manual

Resources

Update Log

June-22-2016

  • Created English wiki